COBHAM SAILOR Fleet One Manual de instalación Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
Chapter 5: Configuration
98-141368-A 77
Save or load a configuration
To save the current configuration to a file
If you need to reuse a configuration in another SAILOR Fleet One terminal, you can save your
current configuration to a file, which can then be loaded into the other terminal.
To save your current configuration to a file, do as follows:
1. In the ADMINISTRATION page, under Configuration, click Save.
2. Accept the default destination file name or type in the destination file name and location.
3. Click OK.
The configuration is now saved to a file. This file is used to load the configuration into another
terminal. See the next section.
To load a configuration from a file
To load a configuration from a file into the SAILOR Fleet One terminal, do as follows:
1. In the ADMINISTRATION page, under Configuration, click Load.
2. Click Browse... to browse to the file you want to import. Then click Open.
3. Click Load.
The new configuration is now loaded into your terminal.
Note
Configuration files can only be exchanged between terminals with the same software
version!
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 131 132

Comentarios a estos manuales

Sin comentarios