COBHAM SAILOR Fleet One Manual de instalación Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
Chapter 3: Get started
98-141368-A 39
Register with the BGAN network
When the terminal is switched on and the SIM PIN is accepted (if required), the
SAILOR Fleet One automatically starts the registration procedure on the BGAN network.
You can monitor the registration procedure in two ways.
Connect the IP Handset from Cobham SATCOM and watch the procedure in the display.
Connect a computer, access the built-in web interface of the terminal and watch the
Status field in the DASHBOARD. For details, see Dashboard on page 54.
The normal startup procedure is shown as follows:
1. Searching. The terminal has instructed the antenna to search for the BGAN signal.
2. Registering. The terminal is attempting to register with the Satellite Access Station (SAS).
3. Ready. The terminal has registered and attached to the SAS and is ready to accept a
service request (a call or a data session).
Connect a smartphone
Wireless access point
The SAILOR Fleet One does not have a built-in WLAN access point. If you want to use wireless
devices with your SAILOR Fleet One you must connect an external WLAN access point to the
LAN interface. Refer to the documentation for your WLAN access point for details on how to
configure and connect it.
Note
The registration procedure may take several minutes.
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 131 132

Comentarios a estos manuales

Sin comentarios