
Chapter 4: Operation
98-141368-A 55
• Satellite selection. The satellite selected for logon. For further information, see Select a
preferred satellite on page 73.
• Current satellite. The satellite to which the system is currently logged on.
• Unit serial number. The serial number of the terminal.
• Software version. The version of the software embedded in the terminal.
• Local IP address. The local IP address of the terminal. This is the IP address used to
access the terminal from a device connected to the terminal.
• IMEI number. The IMEI number (International Mobile Equipment Identity) of the
terminal. This is a unique number that identifies your terminal.
• Antenna status. The status of the antenna.
The antenna status can be:
Ready The terminal has registered and connected to the SAS and is ready to
accept a service request (a call or a data session).
Data active The terminal has established a call or a data session through the
BGAN network.
No GPS fix The GPS receiver has not yet achieved position fix. It may take some
time to achieve GPS fix depending on a number of conditions. First of
all, the antenna should have an unblocked view to as much of the sky
as possible.
The terminal will not be able to register with the SAS without a GPS
fix.
Not registered The terminal has not been able to register with the BGAN network
Displayed text Meaning
Sky scan The antenna is searching for the BGAN signal.
Tracking The antenna has found and locked to the BGAN signal. The antenna is
now tracking the BGAN signal.
No antenna No known antenna is detected by the terminal.
Displayed text Meaning
Comentarios a estos manuales