COBHAM SAILOR Fleet One Manual de instalación descargar pdf (Pagina 72)

Chapter 4: Operation

98-141368-A 64

If your SIM card uses a PIN and the PIN has not yet been entered, the web interface will

open on the PIN page.

2. Type in the PIN and click OK.

When the PIN is accepted, the web interface opens the Dashboard and is ready for use. If

the PIN is not accepted, see Wrong PIN on page 65.

To enter the PIN using an analogue phone

With an analogue phone connected to the terminal, do as follows:

1. Pick up the phone. When the terminal is waiting for a PIN, you will hear 2 beeps - pause - 2

beeps - etc.

2. Dial <PIN> followed by #.

When you hear a “busy” tone or a dialling tone, the PIN has been accepted and you can hang

up or dial a number. If you do not hear a “busy” or dialling tone, you may have entered a wrong

PIN. See Wrong PIN below.

To enter the PIN using the IP Handset from Cobham SATCOM

With an IP Handset connected to the terminal, do as follows:

1. From the handset display, select Menu.

2. Select BGAN > Enter PIN.

3. Enter the administrator user name and password for the terminal.

Default user name: admin and password: 1234.

Note

The menu item “Enter PIN” is only available when the terminal is waiting for a PIN.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 131 132

Sin comentarios

COBHAM SAILOR Fleet One Manual de instalación Pagina 72