COBHAM H264ENC Guía de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 125
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 8-49
8.3 Working with the Control PanelSOLH264TX
The broadcast transmitter has a control panel to enable you to change modes,
configurations and to control the RF setting.
8.3.1 Selecting the Root Menu
1. Power on the SOLH264TX
2. Let the unit initialize
3. You’ll see the frequency and the Root menu on the display screen:
Figure 8-1 Selecting the Root Menu
8.3.2 Selecting a Configuration
You’ll need a powered SOLH264TX set at the root menu as in 8-3-1 above.
1. Push up/down on the Joystick button to select a new configuration number
2. Your new configuration appears highlighted.
3. Push the Joystick / Confirm button to select the new configuration
4. The highlight disappears and your new configuration number is displayed.
Note: Changing a configuration turns off the RF output to prevent accidental transmission
and potential interference. The RF output must manually be re-enabled once the user is
confident that the correct configuration has been selected.
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 124 125

Comentarios a estos manuales

Sin comentarios